Differences of the remix compared to the original

This is a modified / fixed SD_CardBox_Single_Cover.stl model to allow flawless drawer insertion and use without having to sand anything.

The height tolerances are perfect for the drawers to slide in and out without issues.

Print Settings

Supports: 
Yes - Note ( Add support blockers for the Lettering and inverted holes.  Supports are not needed for those areas. )

Resolution:
0.2mm  ( For more production resolution use 0.15mm )

Infill: 
40%

Wall Line Count / Perimeters:
3

Filament:
PLA, PLA+, PETG, ABS, PC, PCCF, NYLON.

Printing Orientation and Supports:
Print SD_CardBox_Single_Cover.stl vertically standing on the back face, with support material for the snap-in studs.  Add support blockers for the Lettering and inverted holes.  Again, supports are not needed for those areas.