Characteristics:

1. Has access to many common ports that you may use frequently. Include: 4 tactile switches, J21 and J26 GPIO headers, SATA port, heatsink and fan, onboard camera, LAN port, SD card reader, HDMI port, USB3.0 port, micro USB port, 2 external antenna, DC barrel jack
2. 180mm*180mm exterior, same side as the default plastic backplate
3. Remains good airflow environment around heatsink.
4. There are 3 ribs inside the case to reinforce overall structure
5. Added 50 3mm holes for attaching extra parts. The holes are in grid pattern(5 rows and 10 columns) and distance from hole to hole is 15mm, which makes attachment design easier. You may attach things like screen, DC-DC converter, usb hub, lan hub, switches, microcontroller, and etc.
6. There are enough gaps between Jetson TX2 and the cover, so it should be very easy to assemble even if your printer isn't very accurate.
7. Designed to be printed with very less amount of support. Saving time and filament.

How to use:

Jetson TX2 comes with a big PCB and a plastic backplate as default. PCB and backplate are connected with 4 M3 screws. This cover also uses that 4 screws to connect to the PCB and backplate. I uses M3*10mm screws.

Remind:

STEP file for both case and Jetson TX2 are added, in case you want to add some features to the case.

Print Settings

Printer Brand:

FlashForge

Printer:

Supports:

Yes

Resolution:

Infill:

20~30%

Filament:

Any PLA/ABS

Any

Category: Robotics