VERY IMPORTANT PRINT INSTRUCTIONS:

Cloud: 

The cloud part can be printed on any of the three flat faces depending on which texture you want. No special print instructions for this one.

Lighting:

The ring a the bottom is to contain the bases of the organic supports, and the rectangle at the top will become the base of the model. PLEASE MAKE SURE THE RING IS ON THE BUILD PLATE!

Support settings for lightning: 

• Supports on 
• Top z contact distance 0(soluble)
• Organic supports
• Turn off don't support Bridges
• Branch diameter with double walls: 0.1 (this makes all the supports have two walls.)

When the print is done, carefully remove from build plate. Remove the ring and glue the bases of the supports onto the small face of the cloud.

If you enjoy this print please show some support by liking the model.