(V2 is available here: https://www.thingiverse.com/thing:6168143)

Recently I saw a useful hand tool, to easily and quickly apply a masking tape.

This guy has made this tool to be sure to apply the masking tape parallel to the edge. https://www.youtube.com/watch?v=z9yAonC0X8o

(positioning the roll at 09:00 and using the tool at 10:00)

I printed the parts, but it is hard to align the masking tape roll with the edge of the roller, and the usage of the magnet is not perfect.

So I modified a little bit the files.

Now its possible to use bearings to fasten the roller..

To use it, simply return the box until the roll go down and use the wrench to lock the position of the masking tape roll

The masking tape roll and the edge of the box will be then perfectly aligned

2 versions are existing

One with one bearing (but the roll can move on the axis)

One with 2 bearings and a bolt

Please, pay attention the way you print the wrench (cle files)

It's important to print it horizontaly to avoid to break the lugs when you will use it

bearings are 608 ZZ

bolt is M4

Category: Hand Tools