1/19/16
10-3 mount adds more tilt to for a better view. Mount bevel 2 is 11mm shorter to better match the mount and bevel.

1/15/16
Mount Bevel 1 is attached to the Mount (10-2-mount) with 3M 20lb. tape. Hot glue is used at the top and bottom to make sure it will not peel loose over time. Mount Bevel attaches to the Tablet with 3M 20lb. double sided foam tape only. The Mount attaches to the printer side with 2 1" strips, 1 top 1 bottom across the mount. I used a cap head screw, washer and a nut to attach the mount to the printer itself. The tape gives some vibration isolation.

This is a Windows 10 Tablet turned into a 3D Printer control Center. The pictures are of a "Unbranded" Tablet on a very modified Printrbot Play. It Started life as a Printrbot Simple Makers kit, upgraded to a Play then a Simple Metal bed modified to fit for 7.4" print length.

Why:
One of the problems with 3D Printers is that they must be connected directly to your computer, for full functionality. You can print with a SD card on most but then you end up running a "sneakernet" you run the card back and forth between your computer and the printer. Or you configure a device, Like a Raspberry Pi as a print server. Sneakernet wastes time. And you can easily hit $100 setting up a print server! My Wife found the print server too hard to use, I found that it was not flexible enough. The LCD "upgrade" is $100 and then you can use multiple files from the SD card.

I decided to look into tablets to see if they could fill the gap. Most Tablets are just too expensive. I have a Surface 3 Pro but it costs more than either of my printers. I found an 8" Hipstreet W8pro Tablet for $56. I bought an OTG cable ($12) to connect micro USB to Micro USB. It worked really well and was faster than the Unbranded tablet. That Tablet was dropped and cracked the screen. I then bought the Unbranded Tablet $75. It has had a number of challenges. Mostly due to it will not except Data and power at the same time.

Look for a Tablet that has the Intel Atom Z3537F 2GB. I recommend 32GB storage. You will find these with Win8 installed. I upgrade them to Win10. I usually use CURA to print, but Repetier also works on the Intel Atom. I also install Sketchup. All work just fine! I recommend you look for a tablet that has separate power and USB connectors. Unless you are not afraid to open a tablet up and do some soldering. A Bluetooth keyboard/touchpad speeds things up. But it can be run by touch alone. You will have to look in refurbished or used to find a decent price. Both of mine came from amazon!

Edit: Matter Control 1.4 works on the Z3537F processor. No preset for the Play. Use Simple Metal and edit bed size, name, no heated bed.

I now have a WiFi connected, touch screen, control center that is very easy to use. I installed a 32GB Micro SD card for more storage and to use and for File History. I can send objects to the tablet by workgroup to a public folder for printing. It is easy to keep the latest software up on the tablet. I also have created my most used links on the desktop. I have a link to the RepRap 3D printing troubleshooter. Oh Yeah my printer can play Netflix too LOL!!

Printrbot

Simple Silver

No

No

.4 nozzle

35%

Printed on Blue tape heated bed at 50C Hotend at 208C