LED Attachment for Lithophane Moon Lamp

Simple attachment which provides a tube surface for LEDs to be wrapped around, and to conceal the wireless connectors.

Steps:

Parts:

• Filament for moon, I used glow in the dark Prusa PLA.
• Filament for stand
• LED KIT: The one I ordered
  • ❗Note❗: Ensure you have wireless (RF) control, not infrared (IR)

Step 1:

Print the Lithophane Moon - Designer Lithophane Moon Lamp

Step 2:

Print the mod, I recommend using the solid-moon-attachment and insert-tube

Check that the moon attachment locks into the moon base

Step 3:

Run the power through the center of the tube and base (see 5th Picture) and test the lights

Make sure all the connectors pass through and can/do attach

Step 4:

Stick down the LED's in a tight spiral around the insert-tube.

Re-test the LED's to be sure

Step 5:

Glue the solid-moon-attachment to the insert-tube

Glue the LED strip to the insert-tube as the default adhesive may not be good enough at the top.

Step 6:

Lock the moon base into the moon.

Step 7:

Enjoy :)