This remix of Zack Freedman’s Hextraction Trap Tiles was done to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for supports.

Learn more about the free 3D-printed board game Hextraction here.

Print Settings

These tiles should be properly oriented & are designed to be printed without supports. For best results, print using a 0.2mm or smaller layer height. I used 40% infill, but you can experiment with other infill densities if you’d like.

Value4Value

This remix is being released under the Value4Value model. If you received any value from my work, please determine what it was worth to you & return that value to me in the form of a donation. Thank you for supporting my work!

Print Info

Printer: VORON 2.4 350
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 40%
Filament: Keene Village Plastics - Orange PLA
MakeShaper - Khaki PLA

“If I have seen further, it is by standing on the shoulders of Giants.” — Isaac Newton

These tiles were remixed from the original Hextraction Trap Tiles by Zack Freedman using Fusion 360.