Specialty panels for hanging Printy Panel shelves on a wall.
 

https://youtu.be/Rua7R26Sotk 
 

https://youtu.be/xgLI_G_G63o
 

Sizes

• 3x3
• 4x4
• 5x5
• 6x6
• 7x7
• 8x8

Printing

• All parts can be printed without supports.
• Add a brim if curling is an issue.
• Use large 0.3mm layer heights for quicker prints that are still strong.
• Use PETG, ABS, or strong formulations of PLA. Silk, woodfill, and matte PLAs are NOT recommended.

Hardware

• Use screws with a flat head and a taper.
• Screw head must be no taller than 3mm to sit flush with the top of the panel.
• Screw shank must be no thicker than 4mm to fit though the panel holes.
• Standard #6 and #8 flat head wood screws will work.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
 

Recommended Attribution Text

"Printy Panels" (https://3dprinty.xyz/project/114) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/)