Summary

I got interested in practical vase-mode designs online and decided to try and design my own, and after some testing and iterations I'm at a point that its satisfactory to me. This utilizes the Vase-mode or Spiraling contour features on 3d printers to create a simple holder, it took me longer to figure out and understand the concept, but now I'm confident that I got the grasp of this. It's simple, functional, and has some decals on it so there's that. I've increased the flow ratio to achieve wall fusion so it will be stronger.

Link to my TikTok https://www.tiktok.com/@autismbawsome0

Print settings-
Enable Vase mode, spiral vase, or spiraling contouring feature
Check to make sure it has 3 bottom layers, my Bambu labs X1C and K1 max has a default of 3 layers already, but check your just in case.
Extrusion width to 0.8mm or change flow ratio from Bambu labs X1C default of 0.98 to 1.5 and the K1 max from default flow ratio of 0.95 to 1.75