An angled spice rack with interconnecting pegs to create an array of them. Each fits a typical spice bottle which is 5" (125 mm) high and 2" (50 mm) diameter.

These holders make it so much better than trying to find a specific spice when they're all bunched together on a lower shelf and all you can see are their tops. Especially great for a pull-out shelf. These are like building blocks that fit together to form whatever number of spices bottles you have from just one to oodles and oodles of them. I printed 50 of them and made them into an 5 x 10 array!

Note: As an adjunct I created low side and front 'filler blocks' that filled the empty space around the spice bottle holders including a center front one that acted as a handle for my specific pull-out shelf.

The following STL files are provided for your spice rack, side fillers and front fillers:

• SpiceRackHolder2-Cut.stl - Main Spice Rack Holder
• SpiceRackHolder2EndLeft-Cut.stl - Left Side Filler
• SpiceRackHolder2EndRight-Cut.stl - Right Side Filler
• SpiceRackHolder2FrontEndLeft-Fusion.stl - Front Left Side Filler
• SpiceRackHolder2FrontEndRight-Cut.stl - Front Right Side Filler
• SpiceRackHolder2FrontMiddle-Cut.stl 0 Front Middle Filler
• SpiceRackHolder2FrontMiddleHandle-Cut.stl - Front Handle (2 Holders Wide)

Prusa

I3 MK3S

No

Yes

0.3 layer height

10%

Added supports on build plate only.

After printing 50 spice bottle holders I arranged them into an array of 5 rows of 10 columns and glued them together using super-glue.