Inspired by a design by @calvin_megazero for a direct drive mount. This should be compatible with @calvin_megazero's remix for the Petsfang fan assembly.

https://youtu.be/bGszZp_2sEU

This is part of a series of mod designs for the Mega Zero V1, here are others mods I've designed:

• MGN9 X-Axis
• MGN12 Y-Axis
• Dual Lead Screw Linear Rods Z-Axis
• Magnetic Lead Screw Anti-Wobble

EDIT 6/4/2021

There was a slight clearance issue with the cable management tie-down point with the Petsfang shroud. I've uploaded a slightly modified version to fit should you want to use the Petsfang fans.

END OF EDIT

Use 2 M3 screws and nuts to secure Sherpa Mini to mount. I believe M3x8mm or M3x10mm will work.

To secure the mount to the plate, a 2mm width zip tie should work.

Print with the part on its side in order to not need support.

No

No

0.2mm

50

50-70% cubic or gyroid infill with 4 line wall