Summary

Just like the other but Tailored for Making extracts
it will rapidly evaporate solvents IE alcohol for making concentrates
or essential oils ect
i use it for concentrating Maca root

you need to print this in abs because of heat bed. print at 100% infill or it will tear itself apart warping i put felt pads on the bottom in the four corners

Spinner
40mm cpu fan 12v
10x2mm magnets x2
M3x60 and aquarium tubing for spacer

heat bed ( http://dirtypcbs.com/store/designer/details/peter.plaaswerf%40gmail.com/168/100x100mm-3d-printer-heated-bed )
a proto pack is 12 of them if i remember right
the heat bed helps speed up evaporation

555 pwm x2 ( scamatic is in pics )
allows you to control temp and spinner speed

Fan for #6 stopper
40mm cpu fan x1
There are some holes that need drilled IE to hold top on to mount fan inside and for heal bed
for 12v power supply i used xbox 360 power brick

You will need to modify the 555 pwm schematic for this project but if you cant see what needs changed you probably cant build the timer yourself anyway LOL.. It is the same timer you would use in a PWM box mod

if you dont like the Ag+ just flip the lid over