Topcap Socket Drives to open / service your MTB fork. The 32mm version was designed for Fox 36 and alike, while the 27mm version suits many Suntour forks. Note that Fox demands about 25Nm torque, which will demand a lot from a 3D printed part, but it works (tested with ABS). Suntour demands about 10Nm, so that should be rather easy for the part. Both socket drives are designed for 3/8 inch wrenches.

Biggest benefits: These socket drives will not damage your precious top caps and are way cheaper than the original parts (the Fox tool is rediculously expensive imho).

Self-designed Hypercube

No

No

100

80

To be printed beefy, more than 80% infill and 3 perimeters is suggested!