A human head that is not modeled by me. The orignal plan was to print this and use this as a head model to create something that is related to the head wear. Most mannequin's head that were sold out there often are smaller sized and not according to one's need especially for a maker.

There are 2 model types, the one has "s175" on the filename means it is scalled at 175 of the original size or 75% larger than the original size.

Head top and btm has been split into 2 parts along with a hole to insert 8mm rod to make this head stand on its on by mounting it onto something stable. Both also scaled at 175 and requires 3 clips to be printed as well.

From slicer's filament usage estimation at 3 perimeter + 20% infill, it would take around 1kg of filament to print a 175 scale.

If you want to print one and want to scale according to your head, print any type of "hat measurement" file and check the video where should you measure your head. It should be equal or slightly bigger than your head measurement. If it is off, scale it again and print.

measurement video
https://www.youtube.com/watch?v=FJJ7N287Mjs

Disclaimer
I do not own nor make this model in the first place.

For "hat measurement", it is recommended to use lower infill along with no top and bottom to shave more print time