Summary

Customizing design

These campus rungs can be ~~adjusted through the customizer~~, most parameters are variable.
Something seems to be wrong with the thingiverse customizer; all mirrored holes are not created (the hole patterns work through symmetry); giving you an irregular hole pattern which is useless.
- problems seems to be fixed, customizer might work! might have been caused by different for loop execution orders?? (problem was in calculating loc0)
Download the .scad file, open in openSCAD and use the customizer section within openSCAD to customize the model.
Each customized model will generate a text on the front of the following format:
- d:22a:-5r:4
- depth (for fingers 22 mm)
- angle (measured from back to front) -5 degrees
- rounding radius (nice for the fingers) 4 mm
I play with the depth, angle and rounding radius to find a comfortable but hard edge to practice on.

I didn't print any yet, but will most likely print the following, these are also supplied as .stl files under thing files:

オリジナルリンク: 詳細を見る

CC BY