Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm

The Model is 200x199.7mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#ac1a17 PLA PolyTerra Army Red Transmission Distance: 0.3

#005aa2 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3

#e2dedb PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #5 (0.8mm) swap to Army Red

At layer #6 (0.96mm) swap to Sapphire Blue

At layer #8 (1.28mm) swap to White for the rest.