Pokemon Pikachu cap fun
Michael Cole
AIで類似品を検索
印刷プロファイル(0)
モデルファイル(0)
0
0
0
公開日時:2026-08-22 12:01:15
0
0
000説明
タグ
モデルソース
レビュー(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled White Transmission Distance: 5.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #22 (1.84mm) swap to White for the rest.
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled White Transmission Distance: 5.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #22 (1.84mm) swap to White for the rest.
タグ
モデルソース
オリジナルリンク: 詳細を見る
CC BY