The FilaWinder BBSpool Adaptors allow for spools with larger centers holes to be used.
With the BBSpool Adaptors you can now use spools with center hole openings up to 89mm.

The FilaWinder comes with spool hubs that allow spools with center opening holes of a max of 55mm. You can use the standard hubs on holes up to 59mm but the spool then catches on the drive gear and control board pins so not ideal.

Print 2 of them. They simply click in and can be pulled off when using smaller spools.

Printed upside down with supports only due to my bed having current poor adhesion. It might be possible to print normally without support. I used 60% infil to ensure if it was rigid.

I printed the parts in ABS but nothing stopping the use of PLA or others.

Hopefully this helps some people out as I could not see anything out there to help get around this issue.