Project: cafe.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 120.45x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Bambulab black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic BambuLab Green Transmission Distance: 4
    PLA BambuLab Matte Marine Blue Transmission Distance: 2
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Red
    At layer #10 (0.88mm) swap to BambuLab Green
    At layer #19 (1.6mm) swap to Marine Blue
    At layer #25 (2.08mm) swap to Ice Blue for the rest.

TAMBIEN PODEIS CAMBIAR ICE BLUE POR JADE WHITE Y QUEDA MUY BIEN.