Bed spacer for Ender - 5 Max
AptBasin
AIで類似品を検索
印刷プロファイル(0)
モデルファイル(0)
0
0
0
公開日時:2026-03-01 11:15:01
0
0
000説明
タグ
モデルソース
レビュー(0)
This model is suitable for those who have a curved bed in one plane. This is the simplest design, which is perfect for leveling the bed and does not require any adjustments. Simply increase the model along the Z axis to the height you need to align the bed. Enjoy
Printing time - 3 min
Nozzle - 0.4 mm
Layer height - 0.2 mm
The filling is of your choice, but there should be no empty space in the part. Since you will have several upper layers and several lower layers, the part will be automatically printed with 100% filling.
TURN OFF THE PRINTER AND TURN OFF THE POWER SUPPLY before installation.
It is very easy to install the part. It is necessary to unscrew the 4 bolts securing the bed on each side. Then you need to put the spacer on the side of the bed you need between the support and the fastener and tighten the bolts in reverse order. After overestimating all the actions, you need to turn on the printer and adjust the auto-calibration of the bed in the settings. Everything is ready!
タグ
モデルソース
オリジナルリンク: 詳細を見る
CC0