Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Protopasta Wonder Black Transmission Distance: 7
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Overture White Transmission Distance: 4.4
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Wonder Black
At layer #17 (1.44mm) swap to Earth Brown
At layer #19 (1.6mm) swap to Orange
At layer #22 (1.84mm) swap to White for the rest.