This is what I made for myself. Before, I always had to stand up to see the screen clearly—my printer was placed on a high shelf, right at my eye level.

This stand not only allows the screen to return to the original tilt angle of the Ender 5, but also enables the screen to be upright, making it more convenient to use.

Please pay attention to the length of the connection cable - my cable is just long enough, but the cable length of different models may vary, so you need to confirm it in advance.

It is recommended to use a printing setting of 20% infill rate and 3 layers at the top and bottom. To achieve a better surface finish, the printing temperature of the first layer can be 10℃ higher than the normal setting.

The Ender 5 is pre-installed when the machine is manufactured, so you don't need to modify it additionally and can use it directly.

The hinge bolts should be selected with a specification of M3 and a length of 40mm.