Adapters to be used with our ADV Tower and our Plate Holder.
You need screws ISO7380 M5x16 or longer.
The blinkers I had needed a small mod: the base partially covers the head of the screw, so with a Dremel you need to remove some material and make room for the tool needed for the M5.
In the Plate Holder you can also mount blind nuts: enlarge the hole and mount the nuts, then you will be able to remove/change the blinkers without removing the Plate Holder.
FGWX-16-C-009 is the adapter for the front blinkers. Plug&Play. First attach the blinker to the adapter, with the M5 already in place. Then mount everything directly on the Blinklight Bracket on our Tower.
FGWX-15-C-009 is the adapter for the front blinkers. Plug&Play. First attach the blinker to the adapter, with the M5 already in place. Then mount everything directly on the Blinklight Bracket on our Tower. The adapter has a recess for the blind nut head, but can be used also if you don't mount the blind nut.