Project: Tiger.hfp
The print fill rate is 100%, the layer height is 0.08mm, and the base layer height is 0.16mm.

The model size is 100x114.08mm.
When the minimum depth is less than 0.48 mm, you can use a higher layer height for printing
The maximum depth is 2.2mm, and the actual depth is 2.3mm.

Consumables used:
PLA PolyLite Pro, black, light transmission distance: 0.3
PLA Sunlu is red, and the transmittance distance is 5.7
PLA Sunlu orange, light transmission distance: 6.4
PLA PolyLite Pro, yellow, light transmission distance: 11
PLA Sunlu is white, and its transparency distance is 7.1 mm.
This print uses five unique consumables

Material replacement instructions:
It all started with black
Replace the sixth layer
Replace the color of the 15th layer
Replace the color of the 17th layer
Replace the filament on the 23rd layer
 

You can use similar colors without having to use exactly the same consumables.