Vertical stand for the Razer Core X.
 

Printing Options:

1. Full - for those with a large print bed
2. Half - for those with a small print bed

1. Full

BOM:

• 1x Full.stl (PLA or stronger)
• 4x Foot.stl (TPU***)
• CA glue

Assembly:

Print 1x of Full.stl. Glue feet onto bottom of stand.

2. Half

BOM:

• 2x Half.stl (PLA or stronger)
• 4x Foot.stl (TPU***)
• 4x 196mm (L) x 8mm (D) rod (I used wooden dowels)
• Glue/epoxy (for dowels/joining halves)
• CA Glue (for feet)

Assembly:

Apply glue to holes in each half, add dowels, combine halves, clamp. Glue feet onto bottom of stand.

***If you do not have TPU for the feet, you can print 1x Foot.stl to use as a template to cut feet out of some sort of anti-slip adhesive.