Project: .autosave.v0.7.3.hfp
Print with a 100% fill rate, a layer height of 0.08mm, and a base layer height of 0.16mm.

The model size is 150x150mm.
You can use a higher layer height for printing at a minimum depth of 0.48 mm or less
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Consumables used:
Bambu Lab PLA Basic Black, Transmission Distance: 0.6
PolyTerra PLA Military Blue, Transmission Distance: 0.3
Bambu Lab PLA Basic Blue, Transmission Distance: 4
Bambu Lab PLA Basic Red, Transmission Distance: 5
Bambu Lab PLA Matte Lilac, Transmission Distance: 2
Bambu Lab PLA Basic Yellow, Transmission Distance: 6
Bambu Lab PLA Matte Ivory White, Transmission Distance: 4
This print uses seven different consumables

Material replacement instructions:
Starting with black
Replace the sixth layer
Replace the 9th layer
Change the color of the 12th layer
Change the color of the 20th layer
Replace the color of the 23rd layer
Replace the filament with ivory white on the 25th layer