Raspberry Pi 5 Case with Pineberry HatDrive! Bottom
CivicBucket
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-01-06 10:49:58
0
0
000Description
Tags
Source du modèle
Avis(0)
Case for Raspberry 5 with Pineberry Pi HatDrive! Bottom NMVE SSD expansion board.
The case has alternate retention mechanism and a slide out cover to allow access to the SSD without removing the case.
Details
Parts to Print
- x1 Case Bottom with threaded insert or Case Bottom with 3D printed threads. x1 Case Lid. x1 M.2 cover. x4 foot x1 M.2 retention clip if you want to swap SSDs
- x1 Raspberry Pi 5 x1 Pineberry Pi [HatDrive! Bottom](https://pineberrypi.com/products/hatdrive-bottom-2230-2242-2280-for-rpi5) x4 M2.5 10 or 12 mm screws to attach feet to bottom and to board. x2 M2.5 8 or 10 mm screws for lid rear. x2 M2.5 4 or 8 mm screws for lid front (screws that come with board will work). x4 M2.5 threaded [inserts for 3D printing](https://www.amazon.co.uk/SHEENO-Knurled-Threaded-Bushings-Internal/dp/B09B6WRJ7F) if using threaded insert version of case bottom.
Required Materials
I hope to improve this case in the future with support for HATs and better access to GPIO pins and camera connectors.
Tags
Source du modèle
Lien original: Voir les détails
CC-BY-SA