Printbed Scraper — Small Size (S40)
Geoffrey Smiley
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2025-09-21 17:03:24
0
0
000Description
Source du modèle
Avis(0)
Printbed Scraper — Small Size (S40)
🧩 Design Concept
A compact printbed scraper sized S40 for quick, precise cleanup. Comfortable to hold and material-efficient, with a chamfered bottom on the handle side so the tool pops off the build plate easily after printing.
Also works well as a plastic scraper/spatula for everyday tasks and DIY projects where a metal tool would be too harsh.
🖨️ Printing Tips
Orientation: Flat on the bed, handle up.
Supports: Not required.
Adhesion: PEI (smooth or textured); a light glue stick if needed.
Post-print: Lightly deburr the working edge for a cleaner feel.
🛠️ Recommended Settings
Material: PETG or ABS for durability. (PLA is possible but will wear faster.)
First layer: 0.24 mm
Next layers: 0.12 mm (smoother finish & a touch more flex) – 0.20 mm (faster print, more stiffness)
Walls / perimeters: 5
Bottom layers: 5
Infill: ~20% (Gyroid)
Top/Bottom pattern: Concentric
Perimeter generator: Arachne walls engine (if your slicer supports it)
Optional: enable ironing on the topmost surface for a crisper finish
🧰 Use & Care
Work at a low angle with gentle pressure on PEI to avoid gouging.
For very stubborn parts, prefer PETG/ABS and keep 5 perimeters for stiffness — or check my other upload: “Set of printbed scrapers and spatulas” with reinforced tough-edge variants.
☕ Support & Follow
If you like my designs, follow me — more functional everyday prints are coming soon, including tool organizers, workshop helpers, and printable accessories.
You can buy me a coffee simply by printing and boosting my files — nothing more 😉
Most of my uploads are completely free, so I’ll be truly happy if you decide to reward my work in any way.
If you’re interested in commercial use of this model, please contact me by leaving a comment.
Source du modèle
Lien original: Voir les détails
CC-BY