If you find it loose, scale "Socket_Clip-Clip.stl" a little larger in slicer software. Update 19/3/2022 Someone asked .stp files are available now. enjoy! _______________________________________________________________________ Update 8/3/2022 The previous vision is only suited to some special filaments like Polymaker PLAplus or PLAmax. If you print it with ESUN PLA+, the release lever will break with a slight touch. Now I modified the structure to make the lever part stronger than the previous one if you want to print it with ESUN PLA+. _______________________________________________________________________ This is a height-adjustable socket clip, I designed it for fixing a socket in my kitchen. In the beginning, I just want to design something to fix the socket hanging under the cupboard. Then I think could it be something flexible for sockets of different sizes, not only for sockets but other kinds of stuff. Now I have this. It's firm and easy to set up, and fits from 26mm to 46mm height sockets. If you want to remove the socket, it has a release lever that can easily work. There are 2 different bases for flat head and button head screws. Only a little support is needed when printing the base, the clip is totally support-free. 0.1 layer height and 80% infill and "Grid" infill pattern are recommended for the reason of strength. Polymaker PLAplus or PLAmax are recommended for the filaments. All the introductions are in the images, enjoy! I share it free for everyone, If this design could help you, it's welcome to tip me at any price:)