EN:
This is an alignment guide for the “Google Pixel9Pro” in use with the “ESR HaloLock Universal Ring 360” set.

DE:
Dies ist eine Montagehilfe für das „Google Pixel9Pro“, als Alternative zu den beiden im „ESR HaloLock Universal Ring 360“ Set mitgelieferten, die nur mit einem iPhone oder Samsung Handy verwendet werden können.

How to use:
Insert your Pixel9Pro into your case and place it on the display side.
Important: The case must have a hard back!
Clean the back with isopropanol or the provided "wet wipes".
Then insert the plastic block into the USB-C port and press the printed alignment guide onto the two pins. The sides of the guide should be parallel to the edge of the Pixel9. Now place the MagSafe ring at the inner top of the guide, according to the ESR instructions and stick it in place.

You can use the coil_position.pdf file to verify the correct position. After the print, the width of the horizontal, outer lines should be 72mm, from left to right. And please remember to pay attention to the curves at the bottom of your case when you place the printout in it. This may result in an error of approx. 1 mm.

HEVO

No

No

0.2

Just print is as thick as you like, but 0.6mm should be fine.