Summary

For bulid battery kugoo vpro need 21700 x144 (16S9P), charge port from NIU G0 G1 G2, and BMS with wire. Nickel tapes to taste.

For Build need print:

Recommend from ABS:
d_block3 x1
Down_block1-2 x2 (3 perimeter 0.6mm)
Down_case x1 (im print 0.6 nozzle 5 perimeter, up down layer height 1.6mm) handle_bat (im print 0.6 nozzle 5 perimeter, up down layer height 1.6mm)
UP_block2-3 x2 (3 perimeter 0.6mm)
UP_pack x1 (i`m print 0.6 nozzle 5 perimeter, up down layer height 1.6mm)
UP_panel1 x1 (3 perimeter 0.6mm)

Recommend from PETG:
3dist_hold x42
4dist_hold x84
outfit x3 (Vase mod 0.8 width perimeter)

Fasteners:
M6 NUT x14
Stud M6 260mm x4
Stud M6 275mm x2(handle_bat mount)
Screw M6 35mm x2(handle_bat mount)