3D Printing Instructions and Details 😄

This model was printed with 100% infill and a layer height of 0.08mm, with the first layer set to 0.16mm for a strong and smooth foundation.

• Model Dimensions: 140x84.26mm
• Minimum Printable Layer Height: 0.48mm
• Maximum Depth: 1.8mm
• Actual Depth of the Model: 1.8mm

Filaments Used:
This print uses 3 unique PLA filaments from GeeTech (feel free to use other brands, but GeeTech is the most affordable option for me):

• Black: Transmission Distance 0.6
• Grey: Transmission Distance 2.5
• Jade White: Transmission Distance 5.6

Swap Instructions:

1. Start printing with Black filament.
2. At layer #10 (0.88mm), swap to Grey filament.
3. At layer #15 (1.28mm), switch to Jade White filament and continue to the end.

This ensures a precise multi-colored print with smooth transitions at the specified depths.

You can use this print however you want without paying or asking for permission.
If you have any questions or feedback, feel free to leave a comment or message me directly.

Greetings, Joshua

If you need original Bambu Lab Filament, contact me. I do fast international shipping for very cheap prices. ;)