Project: Wool_Bookmark2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 51x153mm in size
 

You may print at higher layer heights below the Min Depth of 0.72mm
 

The Max Depth is 2.5mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Lava Red Transmission Distance: 1
    PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Lava Red
    At layer #22 (1.84mm) swap to Savannah Yellow for the rest.