This is an adapter for usb c, barrel plug and xt60. The brick also includes bait modules which make your fast chargers supply the desired voltage. I like to use a 12V bait module to power 12V electronics and a 20V bait module to use the full power of the phone charger. The bait modules are only for an input form a phone charger, for usb c output use the usb c plug.

What you need:

• 6 M3 screws (about 8mm long)
• 2 M3 nuts
• XT60 male plug https://aliexpi.com/J0uz
• Barrel plug (type G) https://aliexpi.com/q9Lv
• USB C plug https://aliexpi.com/ClEW
• USB C Bait modules (pick which one you want) https://aliexpi.com/74iJ
• Hot glue gun

Assembly (Look at the pictures):

• Use little bit of glue to glue the modules in place. Be carefull not to put glue on the solder pads.
• Solder the pluses together.
• Solder the minuses together.
• Screw in the XT60 plug with 2 M3 screws and 2 M3 nuts. The plug comes with M2.5 nuts which you have to take out.
• Glue everything.
• Screw on the lid.

No

0,2

0,5 line width