A multiple node (3 or 5) stand adapter that connects a standard US threaded microphone stand to several standard 1/4" 20 TPI camera thread mounts on moveable arms. Requires threaded thumbscrews (I use 1/2" long screws) and a microphone stand, but everything else is included. Not suitable for heavy or large cameras - the arms are rigid for their size, but they are not especially strong or vibration resistant.

Print one central piece (3 or 5 way mount), then an appropriate number of arms of chosen length (short, medium, long) and a nut for each arm printed. Optionally, you can print the included washers (large go with threaded arm mounts, small go with camera mounts) in TPU or other flexible filament for some extra protection against slipping or if your camera mount screw is too long to snug the device to the stand. The washers will print fine in harder materials, but will only be useful as shims.

Prusa

I3 MK3S

No

No

200um

25%

I used PETG for the rigid parts and TPU for the washers, should work well with most filaments but washers are best in flexible filaments. Can print unsupported with the top side down on the triple mount, but best to use supports (back side down) on the pentuple mount.