1515 T-nut (for Voron0)
Electric Maze
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2021-01-10 17:23:39
0
0
000Description
Source du modèle
Avis(0)
Summary
It is a great help during installation to prevent the nuts from moving. During the construction of Voron0, it comes in very handy with the screws of Pocketwatch, TopHat, Bed_Mount.
Hardware: M3 Square Nuts from Aliexpress (5.5mm x 5.5mm x 2mm)
The MakerBeam version is lower than the Chinese frame. I haven’t tried, but LDO frame can be similar to Chinese.
The flat version is needed for places like Voron0 T8_Nut_Block.
The hex nut is too high, it is difficult to print because only one or two layers get under the nut. (depending on the frame) But it also works.
Source du modèle
Lien original: Voir les détails
CC BY