Motorcycle support for TomTom

Speed 35 mm/s - temp. 240° extruder / 70° bed
layer fan 60% from the 6th layer

required material:

N° 4 hex nuts M4
N° 4 screws M4 x 40mm

TEVO

Tarantula

Doesn't Matter

Yes

0,15

I inserted 4 m4 hex nuts inserting the pause in the gcode before closing the last layer

find the right layer and insert the following lines in the Gcode:

G91 ; set the coordinates in relative
G1 Z10 ;raise the nozzle by 10 mm
G90 ; set the coordinates in absolute
G1 X0 Y240 F1000 ; move the cart to the x and y coordinates you indicate
M400
M300 S300 P1000 ; acoustic warning
M0 Premi per ripartire ; command waiting for the key to be pressed
G91 ; set the coordinates in relative
G1 Z-10 ; lower the nozzle by 10 mm
G90 ; set the coordinates in absolute