Tesla Model X Garment Hook
Sharp Weld
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-01-27 20:31:20
0
0
000Description
Tags
Source du modèle
Avis(0)
I love my new Tesla Model X, but quickly realized there was no place to hang my suit coat or dry cleaning so I decided to make my own. I used a Type a Machines Series 1 Pro printer and Cura V1.5. I used 3D infill at 3mm separation (Cura uses space between infill instead of percent so it is nearly solid). The material I used is Proto Pasta Carbon Fiber PLA and it is plenty strong. PLA may work, but you will have to experiment. I am pretty sure ABS will work as well. Note: I used small self adhesive rubber feet on the back of the hook to limit scratching of the seat back as well as hold it in place while driving: https://www.amazon.com/VOVOV-Self-adhesive-Rubber-Bumpons-diameter/dp/B016GWHSBE/ref=sr_1_5?ie=UTF8&qid=1504108807&sr=8-5&keywords=rubber+feet+for+electronics
Print Settings
Printer Brand:
Type A Machines
Printer:
Type A Machines 2015 Series 1
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
Cura 3D 3mm
Notes:
I love my new Tesla Model X, but quickly realized there was no place to hang my suit coat or dry cleaning so I decided to make my own. I used a Type a Machines Series 1 Pro printer and Cura V1.5. I used 3D infill at 3mm separation (Cura uses space between infill instead of percent so it is nearly solid). The material I used is Proto Pasta Carbon Fiber PLA and it is plenty strong. PLA may work, but you will have to experiment. I am pretty sure ABS will work as well.
Note: I used small self adhesive rubber feet on the back of the hook to limit scratching of the seat back as well as hold it in place while driving: https://www.amazon.com/VOVOV-Self-adhesive-Rubber-Bumpons-diameter/dp/B016GWHSBE/ref=sr_1_5?ie=UTF8&qid=1504108807&sr=8-5&keywords=rubber+feet+for+electronics
Tags
Source du modèle
Lien original: Voir les détails
CC-BY