Summary

Vented Case for "PiKVM v2"

The Case for Raspberry Pi 4 based PiKVM v2.

Original design

The case is a modified version of the following project:

• PiKVM Case by motey1
• PiKVM Case by ravand (fork)

List of changes

This project is based on the forked version of the original PiKVM. List of major changes:

• Ditched fan mount for passive cooling, added holes for open air design.
• The project is now compatible with both CSI bridge sizes.

Required hardware

This is a list of hardware needed to complete the setup:

• Type-C Power Splitter
• 0.91" 0.96" inch OLED LCD Display Module
• M3x20 screws set
• Raspberry Pi 4
• HDMI to CSI-2 bridge based on TC358743 (Note: Various sizes accepted)

CSI bridge selection

The v1 accepts only 30mm CSI bridges.
The v2 introduced an adapter mechanism; both 30mm and 35mm bridges are compatible, but require printing an adapter. This feature was carried over to the later versions.

List of parts to print

What needs to be printed:

• Both front and back case assemblies
• For v2 and later: adapter for either 30mm or 35mm wide CSI bridge.

Notes:

• The adapters shall be printed flat, as tolerances were adjusted for that position.
• Always print the newest version of the case and the adapters.
• The stl files that are not in a .zip archive shall always be the recent version.

Change log

V1

• Ditched fan mount
• Added holes for cooling
• Adjusted bridge mount for 30mm wide CSI bridge

V2

• Improved and added more cooling holes, making them symmetrical.
• Introduced adapters for accepting both bridge sizes.

V3

• Adjusted the adapters to cover the full length of the bridges.
• Fixed the issue of 30mm bridge not having a lock.
• No changes to the case itself have been made.