This is a 160 x 240mm print, beautiful in black and white.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used

• PLA Siddament Black Transmission Distance: 0.2
• PLA+ eSun Grey Transmission Distance: 1.4
• PLA Overture Light Grey Transmission Distance: 1.6
• PLA Default White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At layer #15 (1.28mm) swap to Grey
• At layer #20 (1.68mm) swap to Light Grey
• At layer #23 (1.92mm) swap to White for the rest.