Original Case Design by Dingusxmcgee

https://github.com/dingusxmcgee/Carpool
 

This case was remixed for easier 3d printing, and I’ve changed the following:

• M2.5 socket head cap screws to M2 self tapping screws
• Alignment slots for the halves and angled foot
• Pocket for weights added in the angled foot.
• Added additional P3Dstore 30x6 oval silicone feet angled foot version.

It is designed to be printed in 3 parts. Top, Bottom and Bottom Angled Foot. It requires no supports and the halves connect via 6 m2x6 self tapping screws. The Foot attaches with 3 m2x6 self tapping screws.

The case fits all standard minivan PCBs, and is intended for Coriander, Hull, or a leafspring switch plates from the original Carpool design.

Coriander or Hull plates mount with 4 m2x6 self tapping screws.

You will need 13 qty m2x6 self tapping screws: Aliexpress

Files for plates can be found here:

MiniVanPlate.xyz

Weights are available here:

ACCRETION 96Pcs 1/4 Oz Black Adhesive Backed Wheel Weights (24 Oz Pack)

Depending on your printer settings, the self tapping screw hole sizes may need to be adjusted. I’ve included both fusion and .step files.