Image of an orchid under the moon. Image was generated in Midjourney and painted in Hueforge

The prompt used was: “orchid, high contrast colors, moonlight, cartoon, cel-shaded art style”

I am still learning how to measure transmission distance (TD) values, so they may not be accurate. Also my first upload!

Zip of the project attached if you wanted to play around.

---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Prusa Noble Blue Transmission Distance: 1.8
PLA Bambu Cyan Transmission Distance: 3.5
PLA Bambu Magenta Transmission Distance: 3.5
PLA Bambu Jade White Transmission Distance: 8

Swap Instructions:
Black until layer #5 at 0.48mm
Noble Blue until layer #9 at 0.8mm
Cyan until layer #12 at 1.04mm
Magenta until layer #15 at 1.28mm
Jade White for the rest.