This is a Nativity Scene that I created to be printed flat on the build plate. This layers one over the other to create a scene that can be lit with a Ikea KAPPLAKE LED spotlight.

Each scene is a 6x7inch print that should lay flat and print without supports on the print bed. The entire thing assembles without any glue or fasteners and should sit easily on a flat surface. Layer height can be anything but standard .2 should be fine. If printed in PETG it will store better over the summer and have less sag or warping.

Useless information: This is still a work in progress and will probably be a V3 before long, however, the main reason for the update is that over time the prints where flapping and breaking when my kids played with it. Another reason is that the tabs on the bottom of the base warped and changed during storage, this enclosed version should fix that. I added a topper to enclose it with the new base and make sure that the inserts stayed where they are. Any feedback will be welcomed if you made it this far.

Bambulabs

Bambu X1C

Yes

Yes

.2

15%

The only thing that needs supports is the base. The rest of it should be orientated correctly and not need supports at all.