Jet Engine Style LED Lamp
StalwartTread
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2015-10-17 14:11:28
0
0
000Description
Tags
Source du modèle
Avis(0)
Summary
This design was inspired by the F-18 Hornet jet engine.
It's main purpose is to look cool I guess.
Turnable intake propeller and a mounting slit for a switch are optional.
( print the corresponding parts )
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
I suggest printing it with red filament and (thinly) spraypainting it afterwards for a nice glow effect.
The top part may need support depending on your printers briding ability.
Post-Printing
Connect 2 bright LEDs ( preferably yellow, orange or warm white ), a 330 Ohm resistor and a 9 V battery in series. You can use 1x_JetEngineLamp_5mmLEDHolder.stl to mount the LEDs.
You'll need:
2x M3x30
1x M3x35
3x M3 Nuts
(allen key screws) to join the two parts. And some self tapping screws (3.1x10 mm or similar) to mount the LEDs.
Basic Circuit
Assembly Reference
optional switch dimensions
You can use 1x_JetEngineLamp_5mmLEDHolder.stl instead of the shown circuit board
How I Designed This
Designed with OpenScad, Blender and "visualized" with FreeCAD.
Tags
Source du modèle
Lien original: Voir les détails
CC BY