Summary New lead screw mount, for M8 and M5 nuts. Mounting on V-SLOT by four M5x10 screw with washer Also there is two distance of center, 14mm is default, like in original D-Bot. And 21mm distance like Z-motors mount, for collinear location nut and motor pulley. This is part for D-BOT, but can be used in others CoreXY constructions. Customization Configuration of bracket (Lead_screw_bracket.SLDPRT Solidworks file) "nut_min_with" - is a width between parallel sides of nut. "screew_hole_diametr" - is diameter of hole, where will screw after nut. "nut_height" - is a depth of mount hole for nut. "screw_distance" - distance from v-slot to center of screw. Also there is preconfigured M5 and M8 sizes