Control the height of your desktop webcam with this adjustable webcam mount. — From about 45mm collapsed to 300mm fully extended

This model is mostly Print-In-Place with the exception of the Top & Cam Screw.

It is recommended to print the Tolerance Test first to make sure the mechanism will work for you.

====

After printing, make sure to push from the bottom to free the individual cylinders.

Feed the Cam Screw through the Top & attach to Webcam. Pull out the smallest cylinder and screw to attach.

===

Once assembled, lift and screw-lock to the desired height.

====

IMPORTANT - Please pay attention to the screw-loosening and screw-tightening directions.