TPU for the main case. PLA for the camera bump protector. Superglue necessary to attach camera protector to the main case. 

Onshape Link if you would like to make edits:

https://cad.onshape.com/documents/86738184e45bbf9947a75821/w/e906fccf74099e6f516b2dd8/e/572cede26fec8f0fda4c7e80?renderMode=0&uiState=6569765901715d57906ca86a

Changes to print settings for the cool infill pattern: 

• Change solid top and bottom layers to 0
• Perimeters = 5
• Infill = Honeycomb
• Fill density = 15%