Summary

I am a huge fan of the Packout tool cases by Milwaukee however I was frustrated that they had not created a tool holder for wrenches. So I decided to fix that! These wrench holders are designed to be used with the Packout Low-Profile Compact Organizer (part # 48-22-8436) to hold a single set of either Metric or SAE wrenches. I designed them specifically around the Milwaukee wrench sets (as those are what I had). The holder can fit Metric wrenches up about to 22mm and SAE wrenches up to about 7/8" (this means the SAE Milwaukee wrench set won't fit the 15/16". For me I just replaced it with a spare 9/16 wrench as that wrench always seems to go missing anyways).

There aren't any specific print settings but I do recommend having 3 or more perimeters to help with strength.

The holders come in two parts to allow for some adjustment. To attach the holders to the Packout box I used hot glue as it's easy to apply and remove if you need to adjust the spacing, however any adhesive should work.

You will also want to grab something to cushion the lids of the boxes to keep the wrenches from moving too much while the lid is closed, window adhesive foam works well.