Small heater
key_contraption
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-01-19 12:27:21
0
0
000Description
Source du modèle
Avis(0)
This is a hot air blower with an external size of 151*116*40. This hot air blower has a small power and cannot provide a wide range of heating. The interior of the 30*30*30 box can be heated to about 50 degrees Celsius, which is suitable for drying the light-curing model, and the lower temperature will not cause the model to be layered.
Screwless housing design
the above is the size of the material used
Installation steps
due to the small internal space, you need to pay attention to the order during installation
before the power socket of the switch box is put in, the wires of the power socket and the wires on one side of the switch can be welded in advance, and the wires on the other side of the switch need to be welded after being installed in the housing.
Wiring method
wiring of w3230 needs to be done after inserting the panel
the temperature probe is located on the left side of the power socket
Source du modèle
Lien original: Voir les détails
CC-BY