Introduction

Hello, and thanks for looking at my model!

I live own a three decker which means that even though I own my own home I also live in an apartment. This creates problems for hobbies like model making, scratch building and miniature painting for wargaming due to space constraints. It's fine to spread out when working on a hobby but that stuff needs to be packed away as small as possible when not in use. Milwaukee PACKOUT was the perfect answer to this - mostly. I have changed the stack once as two new pieces came out but it still needed some adjustment to make it perfect for my needs.

At first I was just using some random bins I found at the local dollar store to organize the drawers in my PACKOUT stack. This is less than ideal. The generic bins are not sized to use all the space in a drawer or use the space they take up efficiently. I have recently been going through my PACKOUT drawers and cabinets with Gridfinity and a few other things to make more efficient use of the space in my stack. I am actually starting to look for stuff to put in the drawers that I am organizing as they take up such little space with Gridfinity.

For reference the two drawer PACKOUTs I currently have in my stack are the three drawer PACKOUT 48-22-8447, the one with two of the short drawers on top and one large drawer on bottom. I also have the original three drawer PACKOUT 48-22-8443, the one with three equally sized drawers. I am using these excellent baseplates by @AlvarosK_398057. I used the optional pins when using his plates but I found no need for glue or double sided tape to hold them in. They fit very tight and keep themselves in. 

This model was designed for one of the two slim drawers using @AlvarosK_398057's slim drawer baseplate but it's Gridfinity, you could use this bin in any standard baseplate. I use these nail files for sanding miniatures and scratchbuilding. This is not an affiliate link and I gain nothing by your clicking it, buying it or not. I simply include the link so you know exactly what type of product it was intended for. There are many brands and grits of these available. Use what you need.

This model is the top of a stackable unit of two that will stack in the shortest drawers found in PACKOUTs without binding when the drawer slides in and out. Realistically you could stack the two models in any order.

Nail Files Used:

https://www.amazon.com/dp/B07L592VJC

Print Settings:

The 3MF file is set to use Prusa's Generic PLA profile which honestly works pretty good for most PLA filament. Change it to whichever brand profile you use for your filament. Aside from that important settings used were:

Infill Density: 20%

Infill Pattern: Gyroid

Optional Setting: I had an issue printing one of these with a corner lifting even with gluestick. The other one printed fine. I reprinted the one that lifted with a 10mm Brim and it was just fine.